crhoda
I have a Generac 12 kW LP Generator Model #0046741, Serial #3960079. I need a pair of over sized pistons. The current size is 90mm and I have been told that I need to go .020 in" over. Generac apparently does not have over sized pistons. Is there a source out there. I prefer a direct response to [email]rrhodacjr@aol.com[/email]. Thanks, Carl
Quote
Gman1
You don't need oversize pistons, you need to find an old block where the cam gear slipped and Generac replaced the whole engine. I just threw away four or five of them. I think it was early in the 12~13~15 kw range.
Quote
crhoda
Over sized cylinders

Good idea if you have some old crankcases or short blocks handy. Unfortunately I did not get a warranty with my generator. Thanks you for the info, Carl
Quote
Skip Douglas SkipD
crhoda;8421 wrote:
Good idea if you have some old crankcases or short blocks handy. Unfortunately I did not get a warranty with my generator. Thanks you for the info, Carl
Give the folks at Ziller Electric (owner/sponsor of this forum) a call. They move a [U]lot[/U] of product and just may have what you want.
Skip Douglas
Quote
crhoda
Over sized cylinders

I have already talked with Kelly and he is getting things together. Will be calling him tomorrow. Thanks, Carl
Quote