bbboomer
Does anyone have the mount hole dimensions for the Generac 22KW?
I had the delivery driver take the cardboard off for inspection when he delivered it.
I then discovered the template for the mount holes is on that cardboard.
Unfortunately the driver took the cardboard.
Quote
78buckshot
I assume your talking about bolting the plastic pad to your site built pad, we very seldom bolt them down, if the pad is level it won't go anywhere. it weighs almost 500lbs. and runs smoothly. Sorry I don't have the dimensions.
Quote
grsthegreat1
Don't bother with trying to set bolts in the slab. Simpson makes a product called Titan bolts. All you do is drill a hole with 3/8" masonry bit after unit is installed and than use impact wrench to install the titan bolt. I only bolt in the front 2 bolts. Here its required by gas inspector to prevent movement.
Quote
GMc
bbboomer wrote:
Does anyone have the mount hole dimensions for the Generac 22KW?
I had the delivery driver take the cardboard off for inspection when he delivered it.
I then discovered the template for the mount holes is on that cardboard.
Unfortunately the driver took the cardboard.


These are the dimensions from my 16KW but they should be the same as yours..
Quote