jfn1000
So my electrician has been here all day wiring, and when ready to test, the control panel is lit up showing the date/time setup, but none of the buttons are working for "Enter", "esc" or up or down. And of course, the generator won't fire up when power is cut to the house. Electrician is double checking all connections, but any input would be appreciated.:)
Quote
Skip Douglas SkipD
It would be helpful to those trying to answer your question if you would tell us what the generator model number is and anything else about it that you can advise us of.
Skip Douglas
Quote
genme
I pulled this from another of jfn1000's posts -
jfn1000;8750 wrote:
I have purchased a Generac 5875 with 200 amp SE rated ATS.
Model 5875, Nexus controller, 999cc Engine, 20kW LP, 2011
Quote
ceb58
Dose it have the Nexus controller? If it dose have you called in for the activation code?
Quote
jfn1000
Thanks all. Sorry, it was the 5875. Turns out a ribbon cable came loose inside the contril panel. Electrician said he must have done it while trying to connect up the wires in the tight space below.
Quote