hilite
I have a 0052500 centurian generator on lp. It stopped producing power a year ago and i'm finally gonna try and fix it. The generator is about 3 yrs old, ran fine, we had a day with no power and generator worked about 5 hrs then just ran but no power. I have ohmed the leads on the line side of the main breaker (breaker off) on the unit and they have continuity (11 and 44 i believe). Does this mean stator bad? I also noticed the led on the regulator doesn't come on not sure which is causing which and so forth. There is 10v during start up on wire 4. I found that before i found the continuity between the main leads on the breaker. Also noticed the breaker itself only closes on one side when turned on...? like if the unit were to produce power only one lead would transfer power.Thanks in advance for any help.
Quote
hilite
16k no power

I have a 16k centurion generator on LP. It ran fine for a couple years then we had a power outage and it ran for about 5hrs then quit producing power. I have started checking it out after reading on here and I do have 10 volts when starting to 4 wire on regulator, however regulator led doesnt come on. I also ohmed across the large black wires and have continuity between the two leads on the main breaker. not to ground or nuetral but between 11 and 44 themselves. Does this mean the stator is shot? I also noticed the main breaker on the unit itself when turned to the on position only closes one side of the breaker ( like if the unit did produce power it would only send 120 from the one side that does close). Any help is greatly appreciated.
Quote